Peugeot 2-Tronic P0810 Clutch Actuator Fault — Repair Specialist | The Vehicle Check

Fault code P0810 on a Peugeot 2-Tronic is a strong indicator of clutch actuator failure. The Vehicle Check specialises in Peugeot 2-Tronic clutch actuator repair and cloning — covering P0810 and all related actuator fault codes across 107, 207 and 1007 models. Nationwide mail-in postal service with drop off at our Enfield office.

What Does P0810 Mean on a Peugeot 2-Tronic?

The Peugeot 2-Tronic — also known as the Peugeot Sensodrive — uses the same SACHS manufactured electro-hydraulic clutch actuator as the Citroen Sensodrive, Fiat Dualogic and Fiat Selespeed systems. P0810 — Clutch Position Sensor Circuit — is stored when the actuator's internal position sensor fails or begins to report incorrect data, causing the gearbox to enter limp mode and refuse gear changes.

Our experience with the SACHS actuator family across multiple manufacturers makes The Vehicle Check one of the most knowledgeable specialists in the UK for Peugeot 2-Tronic clutch actuator repair. Our full clutch actuator repair and cloning service covers all 2-Tronic variants.

Fault Codes on Peugeot 2-Tronic Failure

P0810

Clutch position sensor circuit — primary fault code on 2-Tronic actuator failure.

P0900

Clutch actuator circuit open — motor circuit failure within the actuator.

P1603

Clutch actuator internal fault — stored on all SACHS actuator family failures.

P1604

Clutch position sensor fault — out of range data from failing actuator sensor.

Symptoms on Peugeot 2-Tronic Actuator Failure

  • Gearbox in limp mode — locked in one gear
  • Vehicle will not move from stationary
  • Juddering or jerking at low speed
  • Gear changes refused or severely delayed
  • Warning light on dashboard
  • Clutch failing to engage or disengage correctly
  • Vehicle cuts out from rest

Peugeot Models Covered

Peugeot 107 2-Tronic
Peugeot 207 2-Tronic
Peugeot 1007 2-Tronic

How Our Service Works

1
Contact us with your fault codes. Contact form or call 0203 489 2610.
2
Remove your actuator and read our how to send your unit guide.
3
Post to: The Vehicle Check, Office 13, 25 Mollison Avenue, Enfield, EN3 7LW.
4
We repair or clone at component level with full testing before return.
5
Refit and calibrate. Clutch calibration required — we provide the procedure before returning.

Don't See What You Need?

The list above covers our most requested services — but it is far from everything we do. Call 0203 489 2610 or email info@thevehiclecheck.co.uk.

Peugeot 2-Tronic P0810 Stored? Send Your Actuator Today.

Contact us first with your fault codes. Post from anywhere in the UK or drop off at our Enfield office. Fast turnaround, warranty included.

Call: 0203 489 2610  |  Email: info@thevehiclecheck.co.uk

Office 13, 25 Mollison Avenue, Enfield, EN3 7LW