Mercedes CLA C117 9G-Tronic 725.0 Mechatronic Repair by Post UK — P073E00 P07B700 — A0009015000 & More

Mercedes CLA C117 9G-Tronic 725.0 Mechatronic Repair by Post UK — P073E00 P07B700 — A0009015000 & More

📷 Image via Pixabay.com · Free to use under the Pixabay Licence

Mercedes CLA C117 9G-Tronic 725.0 Mechatronic Repair by Post UK — P073E00 & P07B700 — A0009015000, A0009014900 & More

When your Mercedes CLA C117 starts lurching between gears, refusing to shift cleanly, or logs fault codes P073E00 (gear shift not completed) or P07B700 (transmission control module performance) in the gearbox controller, the culprit is almost always the 9G-Tronic 725.0 mechatronic unit — a combined hydraulic and electronic assembly buried inside the transmission sump. These codes don't mean the whole gearbox is finished; they mean the mechatronic unit needs specialist attention.

The Vehicle Check repairs 9G-Tronic 725.0 mechatronic units for Mercedes CLA C117 owners across the whole of the UK by mail-in service, with a 3–5 working day turnaround and free tracked return shipping.

Quick Facts — CLA C117 9G-Tronic Mechatronic Mail-In Repair
Detail Information
Service 9G-Tronic 725.0 mechatronic unit repair
Vehicle Mercedes CLA C117
Fault codes addressed P073E00, P07B700
Part numbers covered A0009015000, A0009014900, A7252709011, A7252705309, A7252703304, A7252701905
Turnaround 3–5 working days from receipt
Return shipping Free tracked courier return
Service area Nationwide UK + international mail-in
Workshop location Office 13, 25 Mollison Avenue, Enfield, EN3 7NJ
How to book Call 0203 489 2610 or enquire via thevehiclecheck.co.uk

What do fault codes P073E00 and P07B700 actually mean on a Mercedes CLA C117?

P073E00 means the gearbox attempted a shift that never completed; P07B700 flags the transmission control module itself as performing outside expected parameters. In everyday driving terms, you'll probably notice the CLA hanging in a gear too long, jerking when changing up or down, slipping momentarily, or in worse cases dropping into a protective failsafe mode that limits you to one or two gears. These are textbook signatures of internal pressure regulation and electronic control faults within the 725.0 mechatronic assembly — not a worn clutch pack or a mechanical gearbox failure. Getting the codes read properly by a Mercedes-capable scanner rather than a generic OBD reader will show you the full picture before you do anything else.

Which part numbers does this service cover, and how do I check mine?

The service covers 9G-Tronic 725.0 mechatronic units carrying the following labels: A0009015000, A0009014900, A7252709011, A7252705309, A7252703304 and A7252701905. These are family-level part numbers, meaning the same number can appear on units fitted across a range of Mercedes models — the number on your specific unit's label is the definitive reference. Before any work begins, TVC asks you to photograph the label on your unit and share it; the team will confirm compatibility and that the number matches the service before you post anything. This two-minute check prevents any surprises and is straightforward to do once the unit is removed.

You can browse the full range of mechatronic services at thevehiclecheck.co.uk/collections/mechatronic.

Why does mail-in repair beat going to a Mercedes dealer for this job?

Mail-In Repair vs. Mercedes Dealer — Honest Comparison
Factor TVC Mail-In Repair Mercedes Main Dealer
Turnaround 3–5 working days Often weeks; subject to parts availability
Unit approach Specialist repair of your existing unit Typically new or remanufactured unit supply
Return shipping Free tracked courier N/A — work done on-vehicle
Location requirement Post from anywhere in the UK or abroad Must attend a franchised dealer
Bench testing Unit bench-tested before return Testing on-vehicle only

TVC's technicians work exclusively on automotive electronics — Mercedes 9G-Tronic mechatronic units are a core part of daily work at the Enfield workshop, bench-tested before they're packaged and returned. That focused depth of experience is what a general dealer workshop, handling everything from service items to bodywork quotes, simply cannot match.

How do I safely remove and post my CLA C117 mechatronic unit?

The mechatronic unit on the CLA C117 is accessible without removing the complete gearbox — a qualified mechanic can have it out in a few hours. Once removed, follow these steps to get it to TVC safely:

  1. Drain any residual transmission fluid from the unit before packaging — fluid-soaked parcels are a courier hazard and can delay processing.
  2. Wrap the unit in bubble wrap, paying attention to the multi-pin electrical connector. Don't leave the connector pins exposed.
  3. Place it in a sturdy box with padding on all six sides — no movement when you shake the box is the target.
  4. Photograph your unit's part number label clearly and email or WhatsApp it to TVC before posting, so the team can confirm the unit against the service scope.
  5. Include a note inside the box with your name, return address, vehicle registration and the fault codes your scanner returned (P073E00, P07B700 or others).
  6. Use a tracked courier service and keep the tracking number — TVC will acknowledge receipt and keep you updated through the repair.

TVC handles mail-in repairs from every corner of the UK — Scotland, Wales, Northern Ireland, the Channel Islands — and accepts international shipments too. The service is built around the postal process from start to finish.

What else does The Vehicle Check specialise in?

TVC is an automotive electronics specialist with hands-on experience across a broad range of units and vehicle makes. Alongside 9G-Tronic mechatronic work, the team handles clutch actuator repairs, BCM, BSI and FRM module cloning, and SRS airbag module crash data repair and reset — all by the same mail-in process. That breadth of work means TVC technicians see real-world failure patterns across multiple systems every day, which informs how each unit is approached and tested.

Frequently Asked Questions — CLA C117 9G-Tronic Mechatronic Repair by Post


Ready to send your CLA C117 mechatronic unit?

If your Mercedes CLA C117 is showing fault codes P073E00 or P07B700 and you've confirmed your unit carries one of the part numbers listed above — A0009015000, A0009014900, A7252709011, A7252705309, A7252703304 or A7252701905 — TVC is ready to help. Send a photo of your unit label before you post anything, and the team will confirm suitability straight away.

Browse the full mechatronic service range at thevehiclecheck.co.uk/collections/mechatronic, or get in touch directly:

  • Phone: 0203 489 2610
  • Workshop address (for postal units): Office 13, 25 Mollison Avenue, Enfield, EN3 7NJ
  • Website: thevehiclecheck.co.uk

⚠️ Warranty Terms for This Repair

  • Our 12-month warranty on this repair is conditional on a full transmission oil and filter change being carried out at the time of refitting.
  • Please keep proof of this — a paid invoice from a garage or workshop — as this will be requested if you ever need to make a warranty claim.
  • This is a transmission component, and correctly completing the fit requires the correct basic settings, adaptations and teach-in procedure for your specific gearbox to be carried out afterwards for it to operate correctly.
  • Many owners with the right diagnostic equipment and experience fit these themselves — that's completely fine. If you're doing the oil/filter change yourself rather than at a garage, keep your own dated records (receipts for the oil/filter, and confirmation the adaptations were completed) as equivalent proof for a claim.

The Vehicle Check is a UK automotive electronics specialist at Office 13, 25 Mollison Avenue, Enfield, EN3 7NJ, offering nationwide and international mail-in repair and cloning. Call 0203 489 2610. Last updated: 15 November 2026.