Honda Jazz i-Shift P1687 Clutch Actuator Fault — Repair Specialist | The Vehicle Check

Fault code P1687 on a Honda Jazz i-Shift is a primary indicator of clutch actuator failure — specifically the clutch position not learned fault that stores when the actuator can no longer complete its startup calibration sequence. The Vehicle Check specialises in Honda Jazz i-Shift clutch actuator repair and cloning. Nationwide mail-in postal service with drop off at our Enfield office.

What Does P1687 Mean on a Honda Jazz i-Shift?

P1687 — Clutch Position Not Learned — is stored by the Honda Jazz i-Shift transmission control unit when the clutch actuator is unable to successfully complete the startup self-calibration procedure. Every time the Honda Jazz i-Shift is started the system performs a short calibration sequence to learn clutch position. When the actuator motor or internal sensors begin to fail this calibration cannot complete, P1687 is stored and the gearbox defaults to limp mode.

Honda Jazz i-Shift clutch actuator repair is a specialist service that very few UK garages offer. Our full clutch actuator repair and cloning service covers all Honda Jazz i-Shift variants. See also our Honda clutch actuator repair page for full Honda automated gearbox coverage.

Fault Codes on Honda Jazz i-Shift Failure

P1687

Clutch position not learned — primary fault code on Jazz i-Shift actuator calibration failure.

P1294

Clutch actuator motor fault — internal motor failure within the actuator unit.

P0810

Clutch position sensor circuit — sensor reporting incorrect data due to actuator failure.

P0900

Clutch actuator circuit open — motor circuit failure stored alongside P1687 on i-Shift faults.

P1686

Transmission range sensor — commonly stored alongside P1687 on i-Shift actuator faults.

Symptoms When P1687 Is Stored

  • Gearbox in limp mode — locked in one gear
  • Vehicle will not move from stationary — clutch not engaging on startup
  • Gear changes refused or severely delayed
  • Gearbox warning light on dashboard
  • Gearbox fails to calibrate on every startup attempt
  • Juddering at low speed during gear changes
  • Loss of drive after flat 12V battery

Models Covered

Honda Jazz i-Shift GD
Honda Jazz i-Shift GE
Honda Jazz i-Shift GG

How Our Service Works

1
Contact us with your fault codes and Jazz model year. Contact form or call 0203 489 2610.
2
Remove your actuator and read our how to send your unit guide.
3
Post to: The Vehicle Check, Office 13, 25 Mollison Avenue, Enfield, EN3 7NJ.
4
We repair or clone at component level with full testing before return.
5
Refit and calibrate. Clutch calibration required after fitting — we provide the procedure before returning your unit.

Don't See What You Need?

Call 0203 489 2610 or email info@thevehiclecheck.co.uk.

Honda Jazz P1687 Stored? Send Your Actuator Today.

Contact us first with your fault codes and Jazz model year. Post from anywhere in the UK or drop off at our Enfield office., warranty included.

Call: 0203 489 2610 | Email: info@thevehiclecheck.co.uk

Office 13, 25 Mollison Avenue, Enfield, EN3 7NJ

⚠️ Warranty Terms for This Repair

  • This is a transmission component, and correctly completing the fit requires the correct basic settings, adaptations and teach-in procedure for your specific gearbox to be carried out afterwards for it to operate correctly.
  • Some clutch actuator systems also require clutch bleeding using a professional diagnostic tool as part of a correct installation — this isn't always obvious, so please check what your specific model needs.
  • Please keep proof the installation was completed correctly — a paid invoice from a garage or workshop — as this will be requested if you ever need to make a warranty claim.
  • Many owners with the right diagnostic equipment and experience fit these themselves — that's completely fine. If you're fitting it yourself, keep your own dated records (confirmation the adaptations/teach-in and any required bleeding were completed) as equivalent proof for a claim.