Kefico P0748 fix repair

P0748 Fault Code Repair for Hyundai i10, i20, i30 & Kia KEFICO ECU TCM

Hyundai & Kia i10, i20, i30 KEFICO ECU TCM P0748 Fault Code – Common Symptoms and Repair Solutions

If you’re driving a Hyundai i10, i20, or i30, or a Kia vehicle with a KEFICO ECU or Transmission Control Module (TCM), you might encounter the P0748 fault code. This code typically indicates an issue with the Transmission Fluid Pressure Solenoid Valve Circuit. If not addressed, it can lead to significant transmission problems, affecting the vehicle’s overall performance.

At The Vehicle Check, we specialize in diagnosing and repairing P0748 faults in Hyundai and Kia vehicles. Here’s what you need to know about this issue and how we can help restore your vehicle’s performance.

What Is the P0748 Fault Code?

The P0748 code indicates a problem with the Transmission Fluid Pressure Solenoid. The solenoid is responsible for regulating the fluid pressure within the transmission. When it malfunctions, it can lead to poor shifting performance, slipping gears, and transmission overheating.

Common Symptoms of P0748 in Kia & Hyundai Vehicles

  • Rough or delayed shifting: You may notice hesitation or jerking when shifting gears, particularly when changing from Park to Drive or Reverse.

  • Check Engine Light (CEL): The P0748 fault will trigger the Check Engine Light to appear on your dashboard.

  • Overheating Transmission: In some cases, the transmission can overheat due to inadequate fluid pressure.

  • Reduced Vehicle Performance: You may experience poor acceleration or slipping while driving, as the transmission isn’t receiving the proper fluid pressure.

If you’re experiencing these symptoms, it's crucial to address the P0748 fault code immediately to avoid further damage to your vehicle’s transmission.

What Causes the P0748 Fault Code?

The most common causes for the P0748 code include:

  • Faulty Transmission Fluid Pressure Solenoid: The solenoid may wear out over time, causing improper fluid regulation.

  • Wiring Issues: Damaged or frayed wiring can affect the electrical signal to the solenoid.

  • Low Transmission Fluid: Insufficient fluid levels can lead to improper pressure within the transmission, triggering the P0748 code.

  • Clogged or Dirty Transmission Fluid: Contaminants or debris in the fluid can cause blockages in the solenoid, affecting its functionality.

How The Vehicle Check Can Help

At The Vehicle Check, we specialize in repairing KEFICO ECU and Transmission Control Module (TCM) faults in Hyundai i10, i20, i30, and Kia vehicles. If your vehicle is showing the P0748 code, our team can:

  • Diagnose the Exact Cause: We use advanced diagnostic equipment to pinpoint the exact issue, whether it’s the solenoid, wiring, or fluid pressure.

  • Solenoid Repair & Replacement: If the solenoid is faulty, we can repair or replace it to restore proper transmission fluid pressure.

  • Transmission Fluid Services: We offer fluid changes, flushes, and top-offs to ensure your transmission is operating at its best.

  • Clear Fault Codes & ECU Reprogramming: After performing the necessary repairs, we will clear the fault codes and reprogram the ECU and TCM to ensure optimal functionality.

Why Choose The Vehicle Check for P0748 Fault Repairs?

  • Expert Technicians: Our team has extensive experience working with KEFICO ECUs and TCMs in Hyundai and Kia vehicles.

  • Fast Turnaround: We understand how important your vehicle is, which is why we work efficiently to get it back on the road as quickly as possible.

  • Affordable Pricing: We provide high-quality repairs at competitive rates, giving you peace of mind without breaking the bank.

  • Customer Satisfaction: We are committed to ensuring that you are fully satisfied with the repair process, from diagnosis to completion.

Contact Us for Fast, Reliable P0748 Fault Code Repairs

If your Hyundai i10, i20, i30, or Kia is showing the P0748 fault code, contact The Vehicle Check today for professional repair services. We specialize in diagnosing and fixing transmission issues and ECU faults.

Call us now at 0203 489 2610 or visit our website to book an appointment.

Back to Common Faults